Product ID:AQUATA-POXY PART B
MSDS Date:09/01/1989
FSC:8040
NIIN:00N014975
Kit Part:Y
MSDS Number: BKNJW

AMERICAN CHEMICAL CORP

1495 ZEPHYR AVE
HAYWARD, CA 94544
US

Emergency Phone: 415-475-0888

Info Phone: 415-475-0888

Cage: 5T256

AMERICAN CHEMICAL CORP

HAYWARD, CA 94544 US

Telephone: 415-475-0888

Cage: 5T256

SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 43-57%

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 0-2%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 0-14%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

SUBSTITUTED ALKYL AMINE

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: CAUSES IRRIT & MAY CAUSE BURNS.
SKIN: PVNT ALL SKIN CONT. MAY CAUSE INJURY TO SKIN FOLLOWING PRLNG
OR RPTD CONT. THE PHENOL DERIVATIVE COMPONENT OF THIS COMPOUND IS A
SPI CLASS 5 IRRITANT. RPTD E XPOS MAY CAUSE SENSIT OF THE
INDIVIDUAL. INGEST: PHYSICAL PROPERTIES SUGGEST THAT THIS ROUTE OF
(SEE EFT OF OVEREXP)
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:HLTH HAZ: EXPOS TO BE EXTREMELY UNLIKELY. ORAL
TOXICITY NOT AVAIL ON CMPD. SEEK IMMED MED ATTN. INHAL: EXCESSIVE
INHAL IS LIKELY TO CAUSE IRRIT OF MUC MEMB. SYSTEMIC & OTHER EFTS:
PROD CAN BE ALKALINE , CORROSIVE, AND IRRIT TO SKIN, EARS, EYES,
AND MUC MEMB. MAY CAUSE INJURY UPON PRLNGD & RPTD CONT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: IMMED FLUSH WITH LRG QTYS OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD. SKIN: WASH IMMED WITH SOAP AND WATER. IF
IRRITATION OR SENSITIZATION OCCURS, REMOVE INDIVIDUAL FROM FURTHER
CONTACT WITH MA TL. INHAL: REMOVE TO FRESH AIR IF EFFECTS OCCUR.
CONSULT MD. INGEST: IF THIS PRODUCT IS SWALLOWED, SEEK IMMEDIATE
MED ATTN.

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
H*2O MAY BE HELPFUL IN KEEPING ADJACENT CNTNRS COOL. AVOID SPREAD
BURNING LIQ W/H*2O USED FOR COOLING PURPOSES.
Unusual Fire/Explosion Hazard:MAY FORM TOXIC MATERIALS, CO, CO*2 &
NITROGEN COMPOUNDS.

Spill Release Procedures:KEEP SOURCES OF IGNITION AND HOT METAL
SURFACES ISOLATED FROM SPILL. MATL MAY FLOW SLOWLY. SCRAPE INTO
CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. AVOID PRLNGD OR RPTD CONT WITH SKIN. DO NOT HANDLE OR STORE
NEAR FLAME, HEAT OR STRONG (SEE OTHER PREC)
Other Precautions:HNDLG/STOR PREC: OXIDANTS. DO NOT STORE IN DIRECT
SUNLIGHT. STORE IN COOL DRY AREA. AVOID PROLONGED STORAGE ABOVE 38C
(100F).

Respiratory Protection:TO AVOID OVEREXPOSURE, WEAR A NIOSH/MSHA
APPROVED AIR-PURIFYING RESPIRATOR.
Ventilation:GENERAL MECH VENT SHOULD BE SUFFICIENT FOR MOST CONDITIONS.
LOCAL EXHAUST VENT MAY BE NECESSARY FOR SOME OPERATIONS.
Protective Gloves:NEOPRENE/CHEMICALLY RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGGLES /FACE MASK.
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY COVERING
CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V7
Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.4-1.6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:HEAVY PAINT TO MASTIC CONSISTENCY.
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, SELECTED EPOXY RESINS, AND STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CO, CO*2 AND NITROGEN COMPOUNDS.

Waste Disposal Methods:PLACE IN CLOSED CONTAINERS FOR SOLID WASTE AND
BURN IN APPROVED INCINERATION OR BURY FILLED CONTAINERS IN APPROVED
LANDFILL IN COMPLIANCE WITH ALL LOCAL AND FEDERAL REGULATIONS.
DISPOSE I/A/W FEDERAL, STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.